液壓機的液壓係統中泄漏油液的原因

  據南通液壓機生產廠家（ ** .jsteang.com）報導：超大四柱液壓機的液壓傳動係統，從當前看來及其從專業的視角而言，其是有兩個單獨的分係統，即是推動體係和同歩糾偏裝置，而且這兩個係統軟件是各自設定為兩大液壓油泵。因而，根據以上，這個問題的回答是為2個分係統，並且是為2個互不相關的分係統。

  液壓機液壓傳動係統體係具備體型小、重量較輕、輸出功率大、運行穩定、可無極變速等優勢，在各種各樣起重設備上獲得廣泛運用。但液壓傳動係統體係的傳輸輸出功率小於別的傳動係統體係，易產生問題且毛病的分析和排除較為艱難。

  The hydraulic tran ** ission system of hydraulic press has the advantages of s ** ll volume, light weight, large power, ** ooth operation and stepless speed regulation, which are widely used in various cranes. However, the tran ** ission power of hydraulic tran ** ission system is lower than that of other tran ** ission systems.

  液壓機液壓體係的走漏原因主要有二種，固定不動密封性處走漏和健身運動密封處走漏，固定不動密封性處走漏的部位主要包含缸底、各三通接頭的連接處等，健身運動密封處主要包含油缸活塞杆部位、多路閥閥座等部位。從壓縮機潤滑油的走漏上也可分成外走漏和內走漏，外走漏主要就是指齒輪油從體係走漏到自然環境中，內走漏就是指由於高壓低壓側的壓差的出現及其液壓密封件無效等緣故，使機油在體係內部由髙壓側流入低電壓側。

  There are two ** in reasons for the leakage of hydraulic system of hydraulic press, the leakage of the fixed seal and the leakage of the movement seal, the leakage of the fixed seal first including the bottom of the cylinder, the joint of the pipe joint, the movement seal first including the cylinder piston rod, multi-way valve stem and other parts. From the leakage of oil can also be divided into external leakage and internal leakage, external leakage ** inly refers to the hydraulic oil leakage from the system to the environment, internal leakage refers to the existence of pressure difference between the high and low pressure side and seal failure, so that the hydraulic oil in the system from the high pressure side to the low pressure side.

  四柱液壓機的主缸，其要想防止升不起來這一問題得話，是要從下列這一些層麵來下手開展，是為汽車繼電器、蜜桃臀久久久蜜桃臀久久久蜜桃臀汽壓及其蜜桃臀久久久蜜桃臀久久久蜜桃臀中的速度限位開關，當這三個確保沒有問題後，才可以規避以上這一問題，從而，來確保四柱液壓機能正常的運轉和應用。